BIOS release 1.6 for KV8-Pro V1.0/1.1

Release information:

[ENGLISH]

1. Support Sempron CPU.
2. Update uGuru Utility to uKV8_018.BIN.
3. Modify "LDT Bus Frequency" item from FSBx5, x4, x3, x2 to x1, and
remove "Auto" selection.
4. Add FSB up to 400 MHz & enhance stability over 300 MHz.
5. Remove HyperTransport Voltage 1.4V.
6. Add "Fixed (74Mhz)" in AGP Ratio item.
7. Fix the issue that "LDT & PCI Bus Control" item "16bit" function fail.
8. BIOS compile date: 07/29/2004


[¤¤¤å]

1. ¤ä´© Sempron CPU.
2. ­×§ï¿ï¶µ "LDT Bus Frequency" ¥Ñ FSBx5, x4, x3, x2 ¦Ü x1, ¨Ã²¾°£ "Auto"
¿ï¶µ.
3. ·s¼W FSB ¦Ü 400 MHz ¤Î¶W¹L 300 MHz ¤§Ã­©w©Ê.
4. ²¾°£ HyperTransport Voltage 1.4V.
5. ·s¼W "Fixed (74Mhz)" ©ó AGP Ratio ¿ï¶µ.
6. ­×¥¿ "LDT & PCI Bus Control" ¿ï¶µ¤§ "16bit" ¥\¯à¥¢®Ä.
7. BIOS¤é´Á: 07/29/2004


********************************* NOTE *********************************

1. How to upgrade BIOS:

a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
Windows95/98
b. Run "kv8p16.exe" to extract all files.
c. Run "runme.bat"

*** Please notice that we suggest you flashing the bios with switches

"/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

d. For more detail, please visit:

http://fae.abit.com.tw/cht/download/bioshelp.htm (Chinese)
http://fae.abit.com.tw/eng/download/bioshelp.htm (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
via jumper before restarting system please.


============================================================================